Armaflex Ultima RS850 glue/adhesive

Non-drip one component adhesive in gel form. Specifically designed for processing Armaflex Ultima and insulating materials based on Armaprene®
synthetic rubbers.
Thixotropic one component contact adhesive based on polychloroprene.
Colour: blue
Material Special Information: Gel based

Non-dripping, high performance thixotropic gel
based adhesive
Minimum solvent emissions when idle
Fast and clean application - Ideal for
installations in workshops and confined spaces
Extended shelf-life
Specially formulated for Armaflex® Ultima and Armaprene® based insulations

While the Armaflex Ultima RS850 Adhesive has been specially developed for installing Armaflex Ultima and other insulation materials based on Armaprene® synthetic rubber, all other Armaflex products (except HT/Armaflex) can be installed using the Armaflex RS850 Adhesive. The new Armaflex adhesives are the result of intense research and development work and have been subjected to numerous application tests.

Properties

Glue / Cleaner

	Artikelnummer	Produktbeschreibung
View variation	AKLRSU850	Armaflex RS850 Ultima ragasztó 0.75 l

Extra information

Unlike the Armaflex 520 Adhesive, Armaflex Ultima RS850 is not a liquid but a gel. This has the advantage that the new adhesive does not drip and there is very little odour. In spite of its firmer consistency, it can be applied very easily using a brush and joining the seams does not require any greater effort. We have tested the adhesion on various surfaces and are very satisfied with the results. This new adhesive is ideal particularly for installations in confined spaces where odour as a result of solvent evaporation can be unpleasant. It’s great that Armacell now also offers a non-drip adhesive for installing other Armaflex products.

Installation guidelines

No drips: the gel-like consistency of the new Armaflex adhesives allows them to be applied evenly, neatly and economically Application on pipes, ducts and tanks with service temperature up to +70 °C. Gluing of Armaflex Ultima and insulation materials based on Armaprene®synthetic rubbers. Application temperature: ideally between +15 °C and +25 °C, not below +10 °C. At temperaturesbelow + 5 °C or high humidity (above approx. 80%), increased condensation may form on the surfaces to be glued or adhesive films. In thesecases bonding is bad or impossible. This can be tested by using absorbent paper (blotting or crepe paper). Work should not be carried out onoperating plant or areas exposed to strong sunlight. Remarks Adhesive bond reaches full strength after 24 hours. The system should not be operated during this period and any self-adhesive tape or protectivecoatings should only be applied after this period has elapsed.